Advanced Tracking Device (U101 ) - with CAN and KWP- Compact Ultra high end Vehicle tracking / Fleet management device | iTriangle Infotech Pvt. Ltd.
Home  »  Advanced Tracking Device (UX101 ) with CAN
Advanced Tracking Device (UX101 ) - with CAN and KWP**
Compact Ultra high end Vehicle tracking/Fleet management black box with rugged IP67* casing.
Tracking device with CAN & K-line, 10 IOs, 2 RS232 or 1 CAN & 1RS232 with ECU type Connector

Controller Area Network(CAN bus) is a vehicle bus standard designed to allow micro controllersand devices to communicate with each other in Automotive applications

The K-Line is a bidirectional single wire bus used for data transfer in the automotive engineering and is standardized as ISO 9141 and ISO14230-1
  • Parameters –location, time, speed, distance, ignition status, etc.
  • 1RS232 & 1 CAN or 2 RS232 ports,1 USB Type
  • 2 Analog inputs, 5 Digital Inputs, 3 Digital Outputs
  • Automotive ECU type connector for additional stability
  • Easy installation and configuration
  • Suitable for hidden/stealth installation with both GPS and GSM internal antennas
  • Voice Communication enabled
  • Low power consumption and power optimization to save vehicle battery
  • Long battery backup-up to 8hrs of tracking with inbuilt 700 mAHLion Battery
  • Motion Sensor-Accelerometer
  • Mains battery removal alert
  • Easy software integration with SDK
  • All parameter configuration through SMS and USB
  • Remote health checking /diagnostic through SMS
  • Configurable Tracking interval, 10Sec,30Sec, 1Min ( other options may be provided based on request)
  • Inbuilt load balancing algorithm. Low communication data usage
  • DNS support available –enables domain name configuration instead of IP address
  • Dual IP support ( special firmware required)
  • Data Storage and forward architecture with storage capacity of 16MB (approx 10000 tracking records)
  • Customization support available

UX101 is a Advanced GSM and GPS terminal which can be used in simple tracking and I/O applications along with real-time tracking.. It can be used as a fleet management device in various domains such as Logistic, taxi operation, rent a car, security tracking, insurance telemetric and asset tracking etc, it has a high level of integration with all internal antennas makes it suitable for hidden/stealth installations. Its compact size enables easy handling and easy installation.

CAN-K line Parameters *

Depends upon the Manufacturer

Parameters Description
Chipset MT6260 
Memory 16 MB solid state  Flash, 100K Erase and Program Cycle, 10 year data retention
GSM Module Quad Band GSM 850/900/1800/1900Mhz,DCS GPRS: class10 Coding Scheme CS1 to CS4  
GPS Module GPS and GLONAS: 99 acquisition-/ 33 tracking channels,Ultra high tracking/navigation sensitivity: -165dBm1,Inbuilt patch antenna, 5 Meters Accuracy
Antennas  Internal Antennas 
Communication Interface TCP/IP on GPRS
Record Storage/buffer  10000 Tracking Records. ( may vary based on configuration and parameter chosen)
Ports 1-USB Device type,  2 RS232  or 1 CAN & 1RS232,  2 Analog Input,  5 Digital Inputs, 3 Digital Outputs
Speed Sensor GPS(default), Real time(VSS Interface)
SIM Interface  Supports SIM card: 1.8V & 3V / Embedded SIM (optional) 
GPRS Packet Data  Class 10 ; Class 8 (Optional), Coding  Scheme CS1 to CS4
LED Indication Processing, GSM, GPS, Power LED, USB LED
Connectors 34  Pin power mate connector
Power Supply Wide DC input voltage range (9V - 32V)
Current Consumption 300mA(Max) during  tracking  and  80mA during standby
Internal Battery  700mAH, 4 to 6 Hr backup
Enclosure Rugged IP 67 rated ABS Plastic Casing
Temperature Operating: -20°C to +60°C
Storage: -20°C to +85°C (Without Battery)
Dimension (L x W x H) in mm 115 x 100  x 30 
Weight 200 grams
FOTA  Firmware upgrade over the air available
Other Interfaces   Tamper Alert Switch. 
Geo Fencing Polygonal Geo Fencing available

  • Immobilization-Relay

  • RFID-Reader

  • Panic Button

  • Probe Sensor
  • And many more...
 Live Support Bot
Select Language